| Autor: |
Mamala, Jarosław, Graba, Mariusz, Bieniek, Andrzej, Hennek, Krystian |
| Zdroj: |
Journal of KONES; September 2018, Vol. 25 Issue: 3 p339-346, 8p |
| Abstrakt: |
This article describes the method of controlling an electric magnetic linear actuator that moves an inlet valve of an internal combustion engine. Thanks to the use of the electric control of the inlet valve of the internal combustion engine, it was possible to implement a variable effective compression ratio of the operating power unit, adapting it to the current needs and engine load. In this design, valvetrain was modified by introducing an autonomous intake valve operation with the use of a specially designed electromagnetic actuator. The introduction of this system necessitated an additional modification of the intake camshaft. The control was carried out with the use of a real-time controller with a built-in FPGA unit. The proposed design of a system with an electromagnetic actuator will allow obtaining an additional degree of freedom in the control unit. Particular attention should be paid to registered values or air pressure in the intake stroke for a closed or partially opened throttle, which generates significant pumping losses. The use of an electromagnetic actuator in the intake can help reduce said losses. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
