Metolachlor dense non-aqueous phase liquid source conditions and plume attenuation in a dolostone water supply aquifer

Autor: Parker, Beth L., Bairos, Kenley, Maldaner, Carlos H., Chapman, Steven W., Turner, Christopher M., Burns, Leanne S., Plett, James, Carter, Raymond, Cherry, John A.
Zdroj: Geological Society, London, Special Publications; 2019, Vol. 479 Issue: 1 p207-236, 30p
Abstrakt: This paper reports a long-term field investigation of a fractured dolostone aquifer that was penetrated by a dense non-aqueous phase liquid. High-resolution source zone characterization shows the evolution of deep penetration to the back-diffusion conditions seen at the present day. Metolachlor, a common herbicide, was released into the overburden overlying a fractured dolostone aquifer within a short time window (1978–81). In 2000, the plume front arrived at a municipal supply well located 930 m down-gradient, increasing to a maximum concentration of 2 μg l−1. Groundwater monitoring with high-resolution, depth-discrete multi-level sampling systems since 1992 shows a clearly delineated bedrock plume. Numerous rock core samples show metolachlor in the low-permeability rock matrix at the bottom of the aquifer. The mass distribution and bedrock hydraulic head pattern strongly suggest that metolachlor entered the bedrock as a free-phase dense non-aqueous phase liquid penetrating to the aquifer bottom, preferentially accumulating in some horizontal fractures, dissolving quickly as a result of the rapid groundwater flow and then diffusing into the rock matrix, where back-diffusion sustains a dilute, persistent and stable plume. Strong plume retardation by matrix diffusion and sorption has greatly mitigated the impact on water quality in the down-gradient supply well, allowing for its continued use, while back-diffusion and degradation maintain a persistent, dilute plume managed by appropriate monitoring.
Databáze: Supplemental Index