| Autor: |
Islam, Farhana, Islam, Md. Naimul, Shahida, Shahirin, Rashid, Harun Ar, Karmaker, Nanda, Koly, Farjana A., Mahmud, Jumana, Keya, Kamrun N., Khan, Ruhul A. |
| Zdroj: |
Nano Hybrids and Composites; October 2016, Vol. 11 Issue: 1 p22-31, 10p |
| Abstrakt: |
Jute fabrics reinforced Unsaturated Polyester Resin (UPR)-based composites were prepared by conventional hand lay-up technique. Different proportions (5 to 50% by weight) of fibre content was used in preparation of the composite. Tensile Strength (TS), Tensile Modulus (TM), Bending Modulus (BM), Bending Strength (BS), Impact Strength (IS) of the fabricated composites were studied. Upon each addition of fiber content in the matrix, mechanical properties of the composites were increased. The Tensile Strength (TS) of the 5% and 50% fiber reinforced composites was 18 MPa and 42 MPa respectively. Scanning Electron Microscopy (SEM) showed interfacial properties of the composites and it was revealed that the bond between fiber and matrix was excellent. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
