| Abstrakt: |
Electrospun shellac nanofibers might be potentially used for wound dressing application due to its natural origin and excellent protective properties. In this study, a full factorial design with three replicated center points was performed in order to investigate the main and interaction effects of shellac content (35-40% w/w), applied voltage (9-27 kV) and flow rate (0.4-1.2 mL/hr) on the morphology of shellac nanofibers. A total of 11 experiments were conducted. The response variables were the diameter of nanofibers, the distribution of diameter and the amount of beads. The results showed that the concentration of shellac was the most significant impact on shellac nanofiber diameter, while applied voltage, interaction between shellac content and voltage, and feed rate were minor factors, respectively. Shellac content and applied voltage had negative relationships with bead amount. When reducing the concentration of shellac and voltage, the amount of beads was increased. However, the influence of these parameters on diameter distribution seemed to be not significant. Based on response surface plot, nanofibers with thinner diameter (~493 nm) and less number of beads (~0.47) could be obtained at the optimum conditions; the shellac content of 38.5% w/w, the voltage of 21 kV and the feed rate of 0.4 mL/hr. |
