| Autor: |
Podgornyj, Yu I, Skeeba, V Yu, Kirillov, A V, Martynova, T G, Skeeba, P Yu |
| Zdroj: |
IOP Conference Series: Materials Science and Engineering; March 2018, Vol. 327 Issue: 4 p042079-042079, 1p |
| Abstrakt: |
The research discusses the cam mechanisms design. The analysis of specialized literature indicates that the synthesis of the cam mechanisms laws of motion is currently done mainly by a standard set of acceleration curves. In some cases, the designer needs to synthesize a new acceleration law which should be task-specific and enforce a certain production step. The values of the technological loads and inertia forces loads generated by the mechanism are calculated to analyze the slay mechanism behavior in the production of closely woven fabrics. Mathematical packages MathCad and SolidWorks are used in calculations. As a result of the research, the authors propose the methodology for synthesizing the slay mechanism with multiple follower displacements for the point of contact between the reed and the fabric edge. Theoretical studies have been tested on a specific machine model (STB loom). The authors have synthesized the motion law of the filling threads beat-up mechanism for the production of strong fabrics. New basic and closing cam profiles are proposed. The results are designed to enhance the possibilities of the looms and to recommend the most efficient equipment operation modes for the producers. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
