Cross-Level Detection Framework for Attacks on Cyber-Physical Systems

Autor: Croteau, Brien, Krishnankutty, Deepak, Kiriakidis, Kiriakos, Severson, Tracie, Patel, Chintan, Robucci, Ryan, Rodriguez-Seda, Erick, Banerjee, Nilanjan
Zdroj: Journal of Hardware and Systems Security; December 2017, Vol. 1 Issue: 4 p356-369, 14p
Abstrakt: Anomaly detection is critical in thwarting malicious attacks on Cyber-Physical Systems. This work presents a novel inference engine that integrates two heterogeneous anomaly detectors, working at different levels of the system architecture, in order to produce a cross-level detector more effective than either one separately. The macro- or process-level detector uses a bank of observers of the physical plant that estimate the state of the process suspected to be under attack, specifically for its sensor to be compromised, from data gathered by available networked sensors. The estimates are then combined using a consensus algorithm to determine if the suspect sensor is reporting false readings. The micro-level detector uses time-sampled side-channel power measurements of an integrated circuit on the suspect sensor. By comparing power measurements against those from a known good state, differences indicate the code running inside has been altered. The cross-level detector performs a two-dimensional Neyman-Pearson hypothesis test that declares the presence of an attack on the sensor node. The cross-level detector is shown to be more accurate and less latent than its constituent parts. Detection was tested against a range of False Data Injection attacks on a hardware prototype and the detector performance was measured experimentally. The cross-level detector on average achieved a 93% rate of correct detection, compared with 72 and 85% for the macro- and micro-level detectors, respectively; and a 50% reduction in latency compared to the macro-level detector.
Databáze: Supplemental Index