| Autor: |
Adibah, B., Mat Taib, Razaina |
| Zdroj: |
Key Engineering Materials; May 2016, Vol. 694 Issue: 1 p54-57, 4p |
| Abstrakt: |
Polymer blend system of polylactic acid (PLA) and core shell as the impact modifier was studied. PLA was melt-blended with different amount of core shell impact modifier (0 to 30 wt.%). The PLA/core shell impact modifier was prepared by single screw extruder and injection molding machine into the required specimens. Morphological properties of the blends were investigated. Scanning electron microscopy (SEM) micrographs revealed that the addition of core shell impact modifier showed a coarser dispersed phase of voids. Dynamic mechanical analysis (DMA) tests confirmed that PLA/core shell impact modifier blends were partially miscible. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
