| Autor: |
Burhannudin, Yanuar, Harun, Suryadiwansa, Ibrahim, Gusri Akhyar |
| Zdroj: |
Applied Mechanics and Materials; April 2015, Vol. 758 Issue: 1 p77-82, 6p |
| Abstrakt: |
This study investigates the influences of driven rotary tool (DRT) on temperatures and forces when turning AISI 1045 steel. A set of cutting conditions was used in FE simulations to predict cutting force, stresses and temperatures developed at around the edge of tool. The material cutting speed ranges were set between 20 and 250 m min-1. The rotary tool speed were 0 and 100 rpm.. The feed rate and the depth of cut were set constant. Simulation results provided the predicted cutting distribution of temperatures and stresses at the chip and work piece. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
