| Autor: |
Talaiekhozani, Amirreza, Ali Fulazzaky, Mohamad, Ponraj, Mohanadoss, Abd Majid, M.Z. |
| Zdroj: |
Desalination & Water Treatment; June 2014, Vol. 52 Issue: 19-21 p3663-3671, 9p |
| Abstrakt: |
AbstractOptimization of biotrickling filter reactor (BTFR) for the removal of formaldehyde contained in synthetic contaminated air was investigated. The importance of formaldehyde from contaminated air is necessary mainly because it is toxic, carcinogen, and mutagen for humans. Although several studies have been conducted on formaldehyde removal by using BTFR from contaminated air, but optimum conditions for formaldehyde removal is not being studied using a trustable method. The determination of optimum condition to remove formaldehyde was carried out with Taguchi experimental design method. The influence of different factors (pH, nitrogen, phosphorus, formaldehyde concentration) on formaldehyde removal efficiency in BTFR was determined, and the optimum condition for maximizing this response was obtained. The result shows that pH has a greater effect on BTFR efficiency for formaldehyde removal. By operating BTFR in optimum condition, the removal rate increased up to 98%. Thus, the operation of BTFR at optimum condition to remove formaldehyde is considered to be essential in minimizing the pollutants present in the atmosphere. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
