| Autor: |
Šebek, Martin, Horňak, Peter, Zimovčák, Peter |
| Zdroj: |
Materials Science Forum; April 2014, Vol. 782 Issue: 1 p111-116, 6p |
| Abstrakt: |
The aim of present article was to consider the influence of annealing parameters on evolution of microstructure and mechanical properties of dual phase steel. Dual phase steel was annealed according to the three chosen cycles of annealing: into intercritical region (780°C), into austenite region (920°C) and into austenite region (920°C) by subsequently cooling into intercritical region (780°C) with the hold at the temperature of 495°C. Tensile tests of the heat-treated specimens were carried out. The obtained microstructure consists from three phases: ferritic matrix, austenite and martensite. Nanoindentation experiments were performed with the peak load of 19.62 mN for ferrite grains and 0.981 mN for austenite and martensite grains, using a Berkovich tip as an indenter. The nanohardness for ferrite and martensite was 2.5 ±1 GPa and 7.1 ±1 GPa and for austenite the nanohardness varied from 4.1 to 4.5 GPa. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
