| Autor: |
Ruzaidi, C.M., Al Bakri, Abdullah Mohd Mustafa, Binhusain, M., Salwa, M.S. Siti, Alida, A., Muhammad Faheem, Md Tahir, Azlin, S.S., Muhammad Faheem, M.T. |
| Zdroj: |
Key Engineering Materials; December 2013, Vol. 594 Issue: 1 p540-545, 6p |
| Abstrakt: |
The application of geopolymer as a coating was not widely explored by other researchers and therefore the study of kaolin based geopolymer coating applied on different types of clay substrate (unsintered and sintered) was carried out. The geopolymer coating paste were initially prepared by mixed the kaolin with alkaline activator (NaOH and Na2SiO3) until homogeneous mixture was obtained. After that, the geopolymer paste then applied on the surface of clay substrates and left to cure at 80oC for 24 hours and sintered at 800oC respectively for 2 hours. Flexural, compression test and SEM for morphology analysis are studied. Based on the results obtained, it shows that kaolin based geopolymer coating can contribute in improving the substrate strength, while curing and sintering temperature applied to the geopolymer coating on different substrate can influence the interaction between substrate and geopolymer paste to diffuse according to SEM image proved. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
