| Autor: |
Zuluaga, Pablo, Frövel, Malte, Restrepo, René, Trallero, Rafael, Atienza, Ricardo, Pintado, José María, Belenguer, Tomás, Salazar, Félix |
| Zdroj: |
Key Engineering Materials; July 2013, Vol. 569 Issue: 1 p88-95, 8p |
| Abstrakt: |
A strong knowledge of the fatigue state of highly advanced carbon fiber reinforced polymer composite (CFRP) structures is essential to predict the residual life and optimize intervals of structural inspection, repairs, and/or replacements. Current techniques are based mostly in measurement of structural loads throughout the service life by electric strain gauge sensors. These sensors are affected by extreme environmental conditions and by fatigue loads in such a way that the sensors and their systems require exhaustive maintenance throughout system life.This work is focused on providing a new technique to evaluate the fatigue state of CFRP structures by means of evaluating the surface roughness variation due to fatigue damage. The surface roughness is a property that can be measured in the field by optical techniques such as speckle and could be a useful tool for structural health monitoring. The relation between surface roughness and fatigue life has been assessed on CFRP test specimens. A tensile fatigue load with an R=0.1 (T-T) and a maximum load of 60% of the material ultimate strength has been applied. The surface roughness of the specimens has been determined from the surface topography measured by a high precision confocal microscope. Results show that the surface roughness of the specimens increases with the accumulation of fatigue cycles in such a way that the roughness could be taken into account as a fatigue damage metrics for CFRP. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
