| Autor: |
Park, Hyeon Soo, Shin, Hyun Woo, Yun, Dong Hyun, Hong, Hyung-Ki, Kwon, Chul Han, Lee, Kyuchung, Kim, Sung-Tae |
| Zdroj: |
Sensors and Actuators B: Chemical; April 1995, Vol. 25 Issue: 1-3 p478-481, 4p |
| Abstrakt: |
Highly sensitive and mechanically stable micro gas sensors have been made using microfabrication and micromachining techniques. The sensing material used to detect offensive CH3SH gas is 1 wt.% Pd-doped, 2000A˚thick SnO2deposited by r.f. magnetron sputtering. The optimum operating temperature of the sensor is 250°C, and the corresponding heater power is about 55 mW. Excellent thermal insulation of the membrane is achieved by the use of a double-layer structure of 0.2 μm thick silicon nitride and 1.4 μm thick phosphosilicate glass (PSG) prepared by low-pressure chemical-vapour deposition (LPCVD) and atmospheric-pressure chemical-vapour deposition (APCVD), respectively. The sensors are mechanically stable enough to endure at least 43 200 heat cycles between room temperature and 350°C. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
Full Text from ScienceDirect