| Autor: |
de Souza, Gabriela Oliveira, Pimenta, Alexandre Santos, Trianoski, Rosilani, Rodolfo de Melo, Rafael, Barbosa de Azevedo, Tatiane Kelly, Castro, Renato Vinicius Oliveira |
| Předmět: |
|
| Zdroj: |
International Wood Products Journal; May2020, Vol. 11 Issue 2, p57-63, 7p |
| Abstrakt: |
This article evaluated the technical viability of producing edge-glued panels (EGPs) with wood from three Brazilian dry forest species and five adhesives. Experimental design was completely randomized, involving 3 wood species, 5 adhesives and 5 replicates, totalizing 75 observations. Test specimens were separated into groups, each one submitted to a different experimental condition or after a pretreatment: dry condition; moist condition; after 6-hour boil test; after a boil cycle test. Glueline performance indicators were the 5th lower percentile and the percentage of wood failure. The three wood species showed good potential for EGPs and two adhesives were able to withstand the 6-hour boil test and the boil cycle test. Despite a negative correlation between extractives content and 5th lower percentile was observed, when the adhesive melamine-urea-formaldehyde (MUF) was used, this detrimental effect was overcome and all the joints reached the minimum strength required by the technical standards. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
