| Autor: |
Shah, Takshil D., Naveen, Y.G., Kattimani, Puttaraj, Kamath, Giridhar, Shah, Kalind, Raza, Aasif |
| Zdroj: |
Saudi Dental Journal; Apr2019, Vol. 31 Issue 2, p251-257, 7p |
| Abstrakt: |
Abstract Purpose/objectives The aim of the research was to develop a model that accurately represents an Aramany class II defect and its obturator prostheses fabricated with Cobalt Chromium alloy & Titanium alloy to compare the deflection and the stress distribution in the rehabilitated area. Methods Aramany class II defect and the obturator prostheses was generated geometrically utilizing ANSYS 14.5, both overlaid on each other to impressionist prostheses and the maxilla as one element. Meshing of models was carried out utilizing HYPERMESH software & materialistic properties were assigned. The 120 N load was constituted on the teeth in different directions. Results The stress distribution & deflection executed by ANSYS provided results that enabled the tracing of Von Mises stress and deflection field in the form of color veiled bands with standards in Mega Pascal (MPa). Conclusion The study shows that Von Mises stresses are higher for the frame work fabricated with cobalt chromium alloy compared to Titanium alloy. The framework made of titanium alloy showed more deflection than cobalt chromium alloy. Clinical implications 3D FEA can be performed on a computer without putting any stress on the human body from technical materials, which is especially difficult for maxillectomy patients. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
