| Autor: |
Tavakoli Mehrabadi, Bahareh Alsadat, Weidner, John W., Garcia-Diaz, Brenda, Martinez-Rodriguez, Michael, Olson, Luke, Shimpalee, Sirivatch |
| Předmět: |
|
| Zdroj: |
Journal of The Electrochemical Society; 2017, Vol. 164 Issue 4, pC171-C179, 9p |
| Abstrakt: |
Cathodic protection is one way to mitigate corrosion of metal surfaces of concentrated solar power (CSP) systems, by shifting the potential of the alloy below its open circuit potential (OCP). The behavior of molten salt CSP systems under cathodic protection can be obtained by developing a three-dimensional (3-D) computational corrosion model. A corrosion model was designed for and benchmarked against a thermosiphon reactor. For the cathodic protection case, magnesium (Mg) was added to the salt as a sacrificial anodic species, which reduces the corrosion rate by cathodic polarization of a corroding metal surface. The model then calculated the new corrosion rate at the surface of the coupons. Results were in good agreement with experimental values for the cases with and without the cathodic protection and at isothermal and non-isothermal conditions. The results showed that by adding even small amounts of Mg into the molten salt (KCl-MgCl2) can rapidly reduce the corrosion rate at the surface of the coupons for both isothermal and non-isothermal conditions. The predicted results also showed that the corrosion rate of Haynes-230 in KCl-MgCl2 containing 1.15 mol% Mg was 35 times lower than baseline tests with no cathodic protection and met the DOE SunShot targets. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
