Finite element analysis of monofilament woven fabrics under uniaxial tension.

Autor: Shen, Yang, Meir, A.J., Cao, Yanzhao, Adanur, Sabit
Předmět:
Zdroj: Journal of the Textile Institute; 2015, Vol. 106 Issue 1, p90-100, 11p
Abstrakt: Mechanical behavior of woven fabrics under tensile load is complex because their deformation could result from the combined effects of tension, compression, bending, and shear. In this study, the tensile behavior of woven fabrics is simulated using finite element method. The input parameters are the mechanical properties of constituent yarns obtained from tensile and friction coefficient tests and the geometry of woven fabric repeating unit. First, a 3D geometric model of the repeating unit based on Pierce’s model was built using computer-aided design tools. Then, finite element analysis which incorporates material properties, frictional contact, and periodic boundary conditions was implemented using ANSYS. A non-linear mechanical behavior was defined. Frictional contact algorithm for the cross-sectional zone of the repeating unit and periodic boundary conditions to the contour of the repeating unit was implemented. Numerical simulation data and experimental data were compared, which showed good agreement. [ABSTRACT FROM PUBLISHER]
Databáze: Complementary Index