| Autor: |
sarreshtehdari, Ali, Chahartaghi, Mahmood, Avatefi Nejad, Ali Mohammad |
| Zdroj: |
Modares Mechanical Engineering; Feb2015, Vol. 14 Issue 11, p77-88, 12p |
| Abstrakt: |
In this paper in order to study of effective parameters on energy and exergy efficiency, the modeling and analysis of fluidized bed dryer of Bandar Imam Petrochemical Complex is performed. For do this paper the commercial code with Euler-Euler two phase flow modeling has been used. Due to the importance of moisture content in the dryer system and method transfer between solid and gas phases, a numerical algorithm for estimating moisture content in each phase and exchange or transfer between phases in the proposed the mentioned, implement the code. With applying this algorithm in the code led to considerable correspondence between the results of modeling and the results from the actual performance of the dryer. The difference between the modeling and the experimental results is maximum 1% that represents significant fitness with similar works. The results also express that increase in inlet air and heat exchanger hot water mass flow rates, reduce efficiency while increment in the mass flow rate and temperature of products increase the efficiency. The results of this research for the mentioned petrochemical complex show that with the 15 % increase in mass flow rate of inlet product, overall efficiency of the dryer rises from 38.62 % to %42 and exergy efficiency increases from 35.16 % to 39.5 % while the product moisture decreases 18%. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
