| Autor: |
Riera, Sara, Barrau, Jérôme, Perona, Arnaud, Dollet, Alain, Rosell, Joan I., Fréchette, Luc |
| Předmět: |
|
| Zdroj: |
AIP Conference Proceedings; 2014, Vol. 1616, p207-210, 4p, 3 Diagrams, 4 Graphs |
| Abstrakt: |
Previous experimental and numerical studies of hybrid cooling devices for CPV receivers were developed under uniform illumination profile conditions; but literature review shows that this uniformity assumption is difficult to satisfy in real conditions. This investigation presents the design and the validation of a hybrid cooling device able to tailor its local heat extraction capacity to 2D illumination profiles in order to provide a uniform temperature profile of the PV receiver as well as a low global thermal resistance coefficient. The inputs of the design procedure are the solar concentration, the coolant flow rate and its inlet temperature. As the illumination profile is 2D dependent, a matrix of pin fins is implemented and a hybrid Jet Impingement /Matrix of Pin Fins cooling device is experimentally tested and compared to a hybrid Jet Impingement / Microchannels cooling device developed previously. The results demonstrate similar performances for both designs. Furthermore, in contrast to the cooling scheme using longitudinal fins, the distribution of the pin fins can be tailored, in two dimensions, to the local need of heat extraction capacity. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
