Autor: |
Menon, Rakhee, Roy, Amitava, Singh, S. K., Mitra, S., Sharma, Vishnu, Kumar, Senthil, Sharma, Archana, Nagesh, K. V., Mittal, K. C., Chakravarthy, D. P. |
Předmět: |
|
Zdroj: |
Journal of Applied Physics; May2010, Vol. 107 Issue 9, p093301-1-093301-6, 6p |
Abstrakt: |
High power microwave (HPM) generation studies were carried out in KALI-5000 pulse power system. The intense relativistic electron beam was utilized to generate HPMs using a coaxial virtual cathode oscillator. The typical electron beam parameters were 350 kV, 25 kA, and 100 ns, with a few hundreds of ampere per centimeter square current density. Microwaves were generated with graphite and polymer velvet cathode at various diode voltage, current, and accelerating gaps. A horn antenna setup with diode detector and attenuators was used to measure the microwave power. It was observed that the microwave power increases with the diode voltage and current and reduces with the accelerating gap. It was found that both the peak power and width of the microwave pulse is larger for the velvet cathode compared to the graphite cathode. In a coaxial vircator, velvet cathode is superior to the graphite cathode due to its shorter turn on time and better electron beam uniformity. [ABSTRACT FROM AUTHOR] |
Databáze: |
Complementary Index |
Externí odkaz: |
|