| Autor: |
MOLDOVAN, V., VIDA-SIMITI, I., JUMATE, N., THALMAIER, Gy., NEMES, D., BRUJ, E. |
| Předmět: |
|
| Zdroj: |
Bulletin of the Transilvania University of Brasov, Series I: Engineering Sciences; 2011, Vol. 4 Issue 1, p67-72, 6p, 2 Color Photographs, 3 Black and White Photographs, 1 Chart, 2 Graphs |
| Abstrakt: |
In our studies we used spherical nickel powder. When powders with similar shapes but different sizes are sintered under the same conditions, the sintering time required to get the same degree of sintering varies. Due to the small particles, the sintering time needed for the formation of the sintering necks is short. The top layer of sedimented samples is over sintered while at the bottom of the sample are in the initial stage of sintering. This phenomenon was studied by sintering of nickel powder with different particle size ranges. The analysis of the sintered layers has been done using scanning electron microscopy. The influence of the sintering regime on the formation of the sintering necks were investigated. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
