| Autor: |
Masugata, K., Hozumi, Y., Aoyama, T., Shimiya, K., Shigeta, M., Shibata, K., Sekimoto, Y., Yatsui, K. |
| Zdroj: |
1990 8th International Conference on High-Power Particle Beams; 1/ 1/1990, p1064-1069, 6p |
| Abstrakt: |
Versatile inductive voltage adder system, “VIVA-I”, with high potential gradient has been successfully developed. It has been designed to produce output pulse of 4 MV, 60 ns by adding 2 MV pulses in 2-stages of induction cells, where amorphous cores are installed. Within ∼40 % of full charge voltage, pulse-power characteristics of Marx generator, pulse-forming line (PFL) , transmission line, and induction cells were tested for three types of load; open circuit, dummy load of CuSO4 resistor, and electron diode. In open circuit test, ∼2.0 MV of output voltage was obtained with good reproducebility. Dependence of output voltage on diode impedance was evaluated by using a dummy load, and good agreement was obtained with that expected. An E-beam diode was operated successfully, and 18 kA of beam current was obtained. [ABSTRACT FROM PUBLISHER] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
