| Autor: |
Gerasimov, Yuri, Seliverstov, Alexander, Syunev, Vladimir |
| Předmět: |
|
| Zdroj: |
Forests (19994907); Dec2012, Vol. 3 Issue 4, p864-880, 17p, 4 Color Photographs, 7 Charts |
| Abstrakt: |
A field-based study was performed to broaden our knowledge of operational efficiency losses associated with the neglect of the proper maintenance of the delimbing and feeding mechanisms of a harvester. The post-harvest assessments of industrial round-wood (IRW) processing damage, fuel consumption and productivity were examined in clearcutting operations. Observations were made of seven combinations of wear levels of feed rollers (A—heavy, B—medium, C and C'vwithout wear) and sharpening states of delimbing knives (1—incorrect, 2—correct), depending on the degree of feed roller wear and matching of angles of knife blades to the technical requirements. The processing defects of IRW were broken down into unprocessed branches, bark stripping, and damage caused by feed roller spikes. The results were then compared with the effective quality requirements, and the IRW losses in terms of the reject rates (RR) were determined in the context of the technical condition. The most frequent damage was by unprocessed branches. The harvester with correctly sharpened knives produced the minimum RR (4% of pine, 6% of spruce and 6% birch logs). The quality of IRW harvested under B1 and C1 resulted in 6%, 6% and 8%. A1 turned out to be the lowest (12%, 10% and 8%). Improvement in the maintenance of delimbing knives can reduce the RR of IRW by 5%. Timely restoration of worn-out rollers can increase productivity by 2% and reduce fuel consumption by 5%. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
