| Autor: |
Albrecht, Alla, Xiaolin Wang, Hanh Hong Mai, Schotzko, Timo, Memon, Imran, Bartels, Martin, Hornung, Michael, Hillmer, Hartmut |
| Předmět: |
|
| Zdroj: |
Nonlinear Optics, Quantum Optics: Concepts in Modern Optics; 2012, Vol. 43 Issue 1-4, p339-353, 15p |
| Abstrakt: |
Photonic components, including functionalized nanostructured surfaces, obtain increasing importance. With decreasing size, the physical limits of conventional fabrication techniques such as photolithography and etching are encountered. Conventional Nanolmprint templates are mainly focused on only high lateral resolution down to 5 nm [1 ]. Thus, three dimensional (3D) photonic nanostructures, requiring also precise vertical height-control, cannot be addressed on the basis of the conventional technology. In this paper, we present high vertical resolution 3D Nanolmprint technologies and its applications concerning strongly miniaturized spectrometers (nanospectrometers) with optical resolution (λ⁄Δλ) up to 500. Our nanospectrometer consists of a 2D array of Fabry-Pérot (FP) filters, designed to match exactly to a 2D CCD detector array in lateral direction with a resulting system size of 2 x 2 x 4 mm³. The 3D filter cavities were imprinted using both 3D UV-Nanolmprint (UV-NI) technology and Substrate Conformal Imprint Lithography (SCIL). For the deposition of Distributed Bragg Reflectors (DBRs), Plasma Enhanced Chemical Vapour Deposition (PECVD) as well as fen Beam Sputtering Deposition (IBSD) were applied. The filter arrays required for the spectrometer have been demonstrated to have an ultra-high transmittance > 80 % and a Full Width at Half Maximum (FWHM) of down to 1 nm. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
