| Autor: |
Demidova, Zh., Velikin, B., Erastov, V., Krasovitskii, V., Vasil'ev, Yu., Sokolov, M., Robinzon-Kruzo, L., Pronichev, Yu., Ornatskaya, L., Klimov, N., Putilin, Yu., Makhov, Yu., Smirnova, D. |
| Zdroj: |
Refractories; 1978, Vol. 19 Issue 1/2, p96-99, 4p |
| Abstrakt: |
The practice of guniting the lining of steelcasting ladles has been introduced for the 300-ton ladles of the open-hearth division of the Cherepovetsk Metallurgical Plant. The guniting parameters are as follows: the temperature of the lining of the ladle wall should be 60-120°C; the amount of wetting agent (sodium silicate solution) for the optimal adhesion of the G unite layer to the brick masonry should give the G unite mix a moisture content of 8-15%, and the density of the aqueous sodium silicate solution should be 1.15-1.30 g/cm. The guniting operation is carried out with a remote-controlled centrifugal-action machine which permits the operation to be carried out at a temperature in the ladle of 200°C. The durability of the ladle lining increases significantly when the lining is gunited regularly up to five times per campaign. The estimated economic benefit from the practice of guniting the 300-ton steelcasting ladles is 85,000 rubles/yr. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink