| Autor: |
Rakina, B., Markevich, Ye., Voskresenskaya, S. |
| Zdroj: |
Refractories; 1961, Vol. 2 Issue 3/4, p146-153, 8p |
| Abstrakt: |
Unfired and fired magnesite refractories on a resin binder base are endowed with rather high density and mechanical strength and exhibit high refractoriness-under-load, increased resistance to elevated temperatures, satisfactory volumetric and thermal stability and conductivity and are air-stored over long periods of time without adverse effects. Regular crushed magnesite brick, fired Satka magnesite lumps and coarse-grained metallurgical powders are suitable for the production of carbon magnesite brick. Preliminary tests of carbon magnesite specimens corroborated the expedience of further production and testing in converter linings. In order to prevent the burning out of the binder, the production of this type of brick requires special heating conditions and lining preparation before the campaign. It is, therefore, recommended that carbon magnesite refractories be investigated in converter linings that are fully made of the above specimens. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink