| Autor: |
Yu-Chun Hsueh, Liang-Hsun Lai, Tzu-Fan Tseng, Jeng-Yue Wu, Sham-Tsong Shiue |
| Předmět: |
|
| Zdroj: |
Journal of Applied Physics; Sep2010, Vol. 108 Issue 5, p053519-35194, 4p, 1 Diagram, 6 Graphs |
| Abstrakt: |
The viscoelastic behavior of commercial UV-cured polymeric coatings of optical fibers is evaluated using dynamic mechanic analysis. The results indicate that relaxation of stresses and/or strains in these coatings occurs by creep deformation. The axial strain-induced viscoelastic stresses in optical fibers are derived from the exact viscoelastic behavior of the polymeric coatings. Compressive radial stress on the glass fiber produces microbending losses, and therefore, microbending losses in double-coated optical fibers that are caused by axial strain-induced creep deformation of polymeric coatings are investigated. These microbending losses can be minimized by suitably selecting the thickness and physical properties of the polymeric coatings, as follows. The radius, Poisson's ratio, and strain ratio of the primary coating should be increased, but the Young's modulus and relaxation time of the primary coating should be decreased. The radius, Young's modulus, Poisson's ratio, and strain ratio of the secondary coating should be decreased, but the relaxation time of the secondary coating should be increased. When the thickness and physical properties of the polymeric coating are chosen to minimize the microbending loss, the thickness and Young's modulus of the secondary coatings should be large enough to withstand an external mechanical force. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
