| Autor: |
Nam, Tae, Hur, Shin, Ahn, In |
| Zdroj: |
Metals & Materials International; Feb1998, Vol. 4 Issue 1, p61-66, 6p |
| Abstrakt: |
In our research, Ti-Ni and Ti-Ni-Cu alloy powders were fabricated by mechanical alloying, and then phase transformation behaviours were investigated by means of X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis and transmission electron microscopy. The size of the Ti-Ni-Cu alloy powders decreased as Cu-content increased. The powders of as-milled Ti-Ni and Ti-Ni-Cu alloys with Cucontents less than 5at.% were amorphous, whereas those of as-milled Ti-Ni-Cu alloys with Cu-content more than 10at.% were crystalline. These characteristics indicate that Cu addition tends to suppress amorphization of Ti-Ni based alloy powders. The monoclinic B19’ martensite is formed in the Ti-Ni-Cu alloy powders with Cu-content less than 10 at.%, whereas the orthorhombic B19 martensite is formed in the Yi-Ni-Cu alloy powders Cu-content more than 10 at.%. The Fe contamination is reduced by decreasing rotation speed from 350 rpm to 250 rpm. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink