| Autor: |
Dietderich, Daniel R., Godeke, Arno, Prestemon, Soren O., Pipersky, Paul T., Liggins, Nate L., Higley, Hugh C., Marks, Steve, Schlueter, Ross D. |
| Předmět: |
|
| Zdroj: |
IEEE Transactions on Applied Superconductivity; Jun2007 Part 2 of 3, Vol. 17 Issue 2, p1243-1246, 4p, 4 Black and White Photographs, 1 Graph |
| Abstrakt: |
Lawrence Berkeley National Laboratory develops high-field Nb3Sn magnets for HEP applications. In the past few years, this experience has been extended to the design and fabrication of undulator magnets. Some undulator applications require devices that can operate in the presence of a heat load from a beam. The use of Nb3Sn permits operation of a device at both a marginally higher temperature (5–8 K) and a higher Jc, compared to NbTi devices, without requiring a larger magnetic gap. A half-undulator device consisting of 6 periods (12 coil packs) of 14.5 mm period was designed, wound, reacted, potted and tested. It reached the short sample current limit of 717 A in 4 quenches. The non-Cu Jc of the strand was over 7,600 A/mm² and the Cu current density at quench was over 8,000 A/mm². Magnetic field models show that if a complete device was fabricated with the same parameters one could obtain beam fields of 1.1 T and 1.6 T for pole gaps of 8 mm and 6 mm, respectively. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
