| Autor: |
Yoh, Jack J., McClelland, Matthew A., Maienschein, Jon L., Nichols, Albert L., Tarver, Craig M. |
| Předmět: |
|
| Zdroj: |
Journal of Applied Physics; 10/1/2006, Vol. 100 Issue 7, p073515, 9p, 1 Color Photograph, 3 Diagrams, 6 Charts, 10 Graphs |
| Abstrakt: |
A model comparison with measurements for the thermal, chemical, and mechanical behaviors in a thermal explosion experiment is presented. Confined high explosives (HEs) are heated at a rate of 1 °C/h until an explosion is observed. The heating, ignition, and deflagration phases are modeled using an arbitrarily Lagrangian-Eulerian (ALE3D) code that can handle a wide range of time scales that vary from a structural to a hydrodynamic time scale. During the preignition phase, quasistatic mechanics and diffusive thermal transfer from a heat source to the HE are coupled with the finite chemical reactions that include both endothermic and exothermic processes. Once the HE ignites, a hydrodynamic calculation is performed as a burn front propagates through the HE. Two octahydrotetranitrotetrazine (HMX)-based explosives, LX-04 and LX-10, are considered, whose chemical-thermal-mechanical models are constructed based on measurements of thermal and mechanical properties along with small-scale thermal explosion measurements. The present HMX modeling work shows the violence calculations with thermal predictions associated with a confined thermal explosion test. The simulated dynamic response of HE confinement during the explosive phase is compared to measurements in larger scale thermal explosion tests. The explosion temperatures for both HEs are predicted to within 1 °C. Calculated and measured wall strains provide an indication of vessel pressurization during the heating phase and violence during the explosive phase. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
