| Autor: |
Stinson, Michael R., Daigle, Gilles A. |
| Předmět: |
|
| Zdroj: |
Journal of the Acoustical Society of America; Oct2005, Vol. 118 Issue 4, p2405-2411, 7p, 5 Diagrams, 3 Graphs |
| Abstrakt: |
The sound field inside a model human ear canal has been computed, to show both longitudinal variations along the canal length and transverse variations through cross-sectional slices. Two methods of computation were used. A modified horn equation approach parametrizes the sound field with a single coordinate, the position along a curved center axis—this approach can accommodate the curvature and varying cross-sectional area of the ear canal but cannot compute transverse variations of the sound field. A boundary element method (BEM) was also implemented to compute the full three-dimensional sound field. Over 2000 triangular mesh elements were used to represent the ear canal geometry. For a plane piston source at the entrance plane, the pressure along the curved center axis predicted by the two methods is in good agreement, for frequencies up to 15 kHz, for four different ear canals. The BEM approach, though, reveals spatial variations of sound pressure within each canal cross section. These variations are small below 4 kHz, but increase with frequency, reaching 1.5 dB at 8 kHz and 4.5 dB at 15 kHz. For source configurations that are more realistic than a simple piston, large transverse variations in sound pressure are anticipated in the vicinity of the source. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
