| Autor: |
Parsons, Jessica E., Cain, Charles A., Fowlkes, J. Brian |
| Předmět: |
|
| Zdroj: |
Journal of the Acoustical Society of America; Mar2006, Vol. 119 Issue 3, p1432-1440, 9p, 1 Diagram, 2 Graphs |
| Abstrakt: |
Design considerations, assembly details, and operating procedures of one version of a cost-effective basic fiber-optic probe hydrophone (FOPH) are described in order to convey practical information to groups interested in constructing a similar device. The use of fiber optic hydrophones can overcome some of the limitations associated with traditional polyvinylidene difluoride (PVDF) hydrophones for calibration of acoustic fields. Compared to standard PVDF hydrophones, FOPH systems generally have larger bandwidths, enhanced spatial resolution, reduced directionality, and greater immunity to electromagnetic interference, though they can be limited by significantly lower sensitivities. The FOPH system presently described employs a 100-μm multimode optical fiber as the sensing element and incorporates a 1-W laser diode module, 2×2 optical coupler, and general-purpose 50-MHz silicon p-i-n photodetector. Wave forms generated using the FOPH system and a reference PVDF hydrophone are compared, and intrinsic and substitution methods for calibrating the FOPH system are discussed. The voltage-to-pressure transfer factor is approximately 0.8 mV/MPa (-302 dB re 1 V/μPa), though straightforward modifications to the optical components in the FOPH system are discussed that can significantly increase this value. Recommendations are presented to guide the choice of optical components and to provide practical insight into the routine usage of the FOPH device. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
