| Autor: |
Miah, M. J., Ahmed, Farid, Hossain, A., Khan, A. H., Khan, Mubarak A. |
| Předmět: |
|
| Zdroj: |
Polymer-Plastics Technology & Engineering; 2005, Vol. 44 Issue 8/9, p1443-1456, 14p, 9 Graphs |
| Abstrakt: |
Jute fiber (Hessian cloth) reinforced low-density polyethylene (LDPE) composites were prepared by heat press molding techniques. The mechanical properties such as tensile strength (TS), bending strength (BS), and elongation at break of the composites were studied. The enhancement of TS (33%) and BS (50%) were obtained as a result of reinforcment jute fabrics in LDPE. In order to improve the mechanical properties and adhesion between jute and LDPE, hessian cloth were each treated with 2-hydroxyl ethyl methacrylate (HEMA). The HEMA-treated jute composite showed higher tensile and bending strength compared to untreated jute composite and LDPE. Dielectric properties like dielectric constant and loss tangent (tan δ) of jute, LDPE and composites were studied. Ferro to paraelectric phase transition occurred in both treated and untreated jute composites containing more than 20% jute. Water uptake behaviors of the composite were monitored and HEMA-treated composite showed lower water absorption behavior. The adhesion nature of jute and LDPE also characterized by scanning electronic microscopy (SEM), better adhesion was observed between HEMA-treated jute and LDPE over untreated ones. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
