| Autor: |
Braun, Artur, Ilavsky, Jan, Seifert, Sönke, Jemian, Pete R. |
| Předmět: |
|
| Zdroj: |
Journal of Applied Physics; 10/1/2005, Vol. 98 Issue 7, p073513, 5p, 1 Chart, 4 Graphs |
| Abstrakt: |
Diesel soot powder generated under idle and load engine conditions was pressed into pellets at pressures ranging up to approximately 8.5 GPa. Soot powder was also immersed in acetone in order to obtain soot aggregates without agglomeration. Small-angle x-ray scattering was carried out on the powder, the pellets, and on the acetone-immersed soot. Powder and pellets show characteristic aggregate structure at small scattering vectors. Scattering curves of the pellets show a shift of the aggregate size-related scattering feature towards larger scattering vectors for increasing pressure. For the highest pressures, this aggregate structure vanished, while the suspected primary particle scattering became visible as the asymptote of the aggregate scattering structure. Soot was immersed and ultrasonicated in acetone to prevent agglomeration of aggregates, which naturally occurs in powders. This can be considered as the simulation of asymptotic behavior for vanishing pressure. Aggregate size of powder was about 290 nm for the idle soot and 240 nm for the load soot. Primary particle sizes were 14.3 and 10.2 nm, respectively. The idle soot showed a higher compressibility (0.9 GPa/nm) than the load soot (12.0 GPa/nm). Pressing the soot into pellets eliminates scattering structures from aggregation of primary particles and provides a good route to reveal the otherwise inaccessible primary particle scattering. In addition, studying the aggregate structure as a function of pellet pressure allows us to derive compacticity data of the soot. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
