| Autor: |
Turalchuk, Pavel, Filipiuk, Irina, Iskakov, Bayazet |
| Zdroj: |
Sensors (14248220); Dec2024, Vol. 24 Issue 23, p7571, 10p |
| Abstrakt: |
Power amplifiers are crucial components that significantly influence the linearity and energy efficiency of next-generation communication system radio units. A key challenge in designing power amplifiers is managing high peak-to-average power ratio (PAPR) in order to achieve both high linearity and energy efficiency during back-off conditions. This paper presents simulation and measurement results for a dynamic load modulation power amplifier based on a ferroelectric tunable matching network to operate at 2.5 GHz. Experimental studies on a power amplifier with the tunable output matching network confirm its performance at 8 dB back-off while varying the control voltage applied to the ferroelectric element. Additionally, a bias modulator to adjust the transistor's load in relation to input power was designed. Measurement studies of the dynamic load modulation power amplifier have demonstrated an efficiency of at least 50% at 8 dB back-off and more than 60% at peak power at 2.5 GHz. Furthermore, it was found that the modulator output voltage adjustment function on input power of the bias modulator affects the linearity of the output power. Different bias responses were studied and, as a result, the optimal output voltage response was found. The proposed load modulation power amplifier is promising for operation with high PAPR digital signals. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
