| Autor: |
Demirsöz, Recep, Singla, Anil Kumar, Uğur, Abdullah, Erdoğdu, Ahmet Emrah, Korkmaz, Mehmet Erdi, Gupta, Munish Kumar, Królczyk, Jolanta Beata, Ross, Nimel Sworna |
| Zdroj: |
Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.); Dec2024, Vol. 238 Issue 6, p2854-2866, 13p |
| Abstrakt: |
The material S235JR was spray-coated with iron-based chromium carbide in the present study. The effects of the initial surface roughness on slurry erosion were investigated. Samples with a rough surface and polished surface were used. The impact of particle concentration, impact velocity and impact angle was studied on the slurry erosion characteristics in terms of mass loss, surface roughness and surface temperature. In addition, the surfaces were analysed using a scanning electron microscope (SEM). Further, the estimation equation has been derived using response surface method (RSM) based on the data obtained in the study. The results show that velocity and concentration are the key factors in determining the mass loss and surface temperature while the impact angle has a relatively minor role. Mass losses in rough samples ranged from 8.8 mg to 40 mg; in polished samples, the range ranged from 5.6 mg to 10.9 mg. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
