| Autor: |
Ciprioti, S. Vecchio, Raimondo, M., Vertuccio, L., Calabrese, E., Aliberti, F., Guadagno, L. |
| Předmět: |
|
| Zdroj: |
Journal of Thermal Analysis & Calorimetry; Oct2024, Vol. 149 Issue 19, p11041-11055, 15p |
| Abstrakt: |
Tetraglycidyl methylene dianiline (TGMDA) was mixed with 1,4-Butanediol diglycidyl ether (BDE) (in a 4:1 mass ratio) and with a stoichiometric amount of the curing agent diaminodiphenyl sulfone which was solubilized at 120 °C for 20 min in the liquid mixture TGMDA + BDE. The so obtained unfilled epoxy resin matrix, denoted as ER, was blended with glycidyl polyhedral oligomeric silsesquioxane and carbon nanotubes in suitable proportions to obtain binary and ternary mixtures. Characterization of the formulated materials was performed using different experimental techniques, such as Dynamic mechanical analysis, Thermogravimetry (TG), Field emission scanning electron microscopy. Furthermore, the investigation of the flame behavior was carried out by the limiting oxygen index and mass loss calorimeter measurements. Direct current measurements and investigation by Tunneling atomic force microscopy of the conductive nanodomain map allowed the evaluation of the electrical properties of the developed nanofilled systems. The TG data related to thermal decomposition of ER and its binary and ternary mixtures were processed according to isoconversional kinetic analysis by assuming a non-Arrhenian behavior of the temperature function, and lifetime prediction was estimated at suitable relatively low temperatures and possible relation between the thermal stability and the presence of each component was discussed. This method of kinetic analysis paves the way for the possibility of evaluating in a more realistic way, on the basis of thermal stability, the potential application of structural resins with primary load functions in contact with hot areas of aeronautical aircraft engines. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink