Influence of Cobalt and Cobalt–Manganese Oxide Coating Thickness Deposited by DLI-MOCVD as a Barrier Against Cr Diffusion for SOC Interconnect.

Autor: Chanson, R., Bouvier, M., Miserque, F., Rouillard, F., Schuster, F.
Předmět:
Zdroj: High Temperature Corrosion of Materials; Dec2024, Vol. 101 Issue 6, p1467-1478, 12p
Abstrakt: The influence of cobalt and cobalt–manganese oxide coating thickness on its ability to be a good diffusion barrier against Cr outward diffusion was investigated for stainless steel interconnects (AISI 441) of a solid oxide cell (SOC). The coatings were all synthesized using a DLI-MOCVD (Direct Liquid Injection-Metal Oxide Chemical Vapor Deposition) hot wall reactor. The study shows that a minimum cobalt oxide thickness of 300 nm was needed to be a good diffusion barrier against Cr for the 500-h exposure test. This observation was linked to the Mn concentration reached in the cobalt spinel during exposure. Indeed, during exposure at high temperature, Mn diffused from the substrate into the cobalt coating and transformed cobalt spinel into Co-Mn spinel. Whereas pure cobalt spinel was a good Cr diffusion barrier, cobalt-manganese spinel, Co3-xMnxO4, was not when x > 2. The thickness of the cobalt coatings must be chosen so that the Mn quantity coming into it from diffusion from the substrate does not degrade the protectiveness of the coating. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index
Externí odkaz: