| Abstrakt: |
A wire is fed into the MIG welding gun, where it sparks and melts to form the weld. It is frequently semi-automated or automatic. TIG welding uses a non-consumable electrode and a separate filler material to combine metals with long rods. TIG and MIG welding are commonly used in industries like pressure vessels, economizers, and Air preheater manufacturing. Combining these processes to optimize benefits and reduce drawbacks is explored. High-thickness welding, found in nuclear reactor core manufacturing, often uses submerged arc welding, but costly. TIG–MIG welding is proposed for 10–40 mm SS316L plates, reducing costs with maintained strength. Design of Experiment is used to vary control parameters. Present article research on SS316L up to 12 mm thick revealed that the following settings would yield the best tensile strength and hardness: 170 A for the welding current, 3 mm for the filler wire diameter, and 14 L/min for the gas flow rate. Values from the experiment and prediction were nearly identical. [ABSTRACT FROM AUTHOR] |
Full text from SpringerLink