| Abstrakt: |
This paper presents the experimental and finite element analysis of surface asperity geometry during the running-in phase of rolling contact. Previous research efforts typically relied on simulating various shapes of asperity geometry to elucidate rough surface characteristics. However, this approximation did not accurately represent the actual surface asperities. In this study, a rolling contact rig was fabricated, and periodic surface scans were utilized to track the deformation of roller surface asperities. The experimental findings reveal a notable 69% reduction in surface roughness throughout the running-in phase, alongside showcasing the deformation of asperity geometry. Subsequently, a simulation model is developed using data derived from these experiments. Stress analysis conducted on individual and multiple asperities illustrates a decrease in contact stress over time, indicating a transition in contact behavior from plastic to elastic. Furthermore, simulations involving multiple asperities demonstrate an expansion in contact length as roughness diminishes with increasing cycles. Initially, only the highest peaks of asperities make contact, resulting in elevated contact stress. However, as rolling cycles progress, a greater number of asperities come into contact, leading to a more uniform distribution of load. Notably, the more prominent asperities endure significant contact stress and deformation compared to their smaller counterparts. [ABSTRACT FROM AUTHOR] |
