| Autor: |
Chen, Jie, Tejado, Elena, Rasiński, Marcin, Litnovsky, Andrey, Nguyen-Manh, Duc, Prestat, Eric, Whitfield, Tamsin, Pastor, Jose Ygnacio, Bram, Martin, Coenen, Jan Willem, Linsmeier, Christian, Gonzalez-Julian, Jesus |
| Předmět: |
|
| Zdroj: |
Metals (2075-4701); Sep2024, Vol. 14 Issue 9, p1092, 13p |
| Abstrakt: |
The self-passivating yttrium-containing WCr alloy has been developed and researched as a potential plasma-facing armour material for fusion power plants. This study explores the use of yttria (Y2O3) powders instead of yttrium elemental powders in the mechanical alloying process to assess their applicability for this material. Fabricated through field-assisted sintering, WCr-Y2O3 ingots show Y2O3 and Cr-containing oxides (Cr-O and Y-Cr-O) dispersed at grain boundaries (GBs), while WCrY ingots contain Y-O particles at grain boundaries, both resulting from unavoidable oxidation during fabrication. WCr-Y2O3 demonstrates higher flexural strength than WCrY across all temperature ranges, ranging from 850 to 1050 MPa, but lower fracture toughness, between 3 and 4 MPa·√m. Enhanced oxidation resistance is observed in WCr-Y2O3, with lower mass gain as compared to WCrY during the 20-hour oxidation test. This study confirms the effectiveness of both yttria and yttrium in the reactive element effect (REE) for the passivation of WCr alloy, suggesting the potential of Y2O3-doped WCr for first wall applications in a fusion power plant. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
