Possibilities of Liquefied Spruce (Picea abies) and Oak (Quercus robur) Biomass as an Environmentally Friendly Additive in Conventional Phenol–Formaldehyde Resin Wood Adhesives.

Autor: Matin, Božidar, Brandić, Ivan, Matin, Ana, Ištvanić, Josip, Antonović, Alan
Předmět:
Zdroj: Energies (19961073); Sep2024, Vol. 17 Issue 17, p4456, 18p
Abstrakt: Considerable efforts have been made to replace formaldehyde-containing adhesives in the manufacturing of wood products, particularly particleboard, with natural alternatives. One promising solution is the liquefaction of lignocellulosic materials such as wood using glycerol (C3H8O3) under sulfuric acid catalysis (H2SO4). The aim of this study was to investigate the chemical composition and properties of spruce and oak biomass after liquefaction and to evaluate its potential as a formaldehyde-free adhesive substitute. All samples were liquefied at 150 °C for 120 min in five different wood–glycerol ratios (1:1 to 1:5). The liquefaction percentage, the insoluble residue, the dry matter and the hydroxyl (OH) number were determined as characteristic values for the polymer properties of the liquefied samples. The results showed the liquefaction percentage was up to 90% for spruce and oak. The insoluble residue ranged from 10 to 29% for spruce and from 10 to 22% for oak, the dry matter ranged from 54 to 70% for spruce and from 51 to 62% for oak, while the highest xydroxyl number was 570 mg KOH/g for spruce and 839 mg KOH/g for oak. Based on these results, liquefied wood was shown to be an effective natural alternative to synthetic resins in particleboard adhesives and a way to reduce formaldehyde emissions. This research not only supports environmentally sustainable practices but also paves the way for various bioproducts derived from liquefied biomass and points to future avenues for innovation and development in this area. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje