| Autor: |
Reddy, L. Sudhakar, Pandiyan, A. |
| Předmět: |
|
| Zdroj: |
AIP Conference Proceedings; 2024, Vol. 2871 Issue 1, p1-9, 9p |
| Abstrakt: |
Utilizing a CNC machine in a wet environment, we will evaluate the content elimination rate achieved when turning tool steel SS310 with carbide insertion treated with TiN as well as those without. In this study, SS310 tool steel material is taken as workpiece and cutting tool used is carbide inserts. The parameters are varied for the experiment at different stages to measure the response. The experiment is carried out on two groups with 27 specimens in each. On the whole 54 specimens are prepared and machined to investigate the output variable. The entire experimentation is carried out under conditions of wet machining. The level of importance was determined to be 0.032 (p<0.05) after the SPSS software was used to analyze the results and produce graphs. At smaller supply rates, the substance reduction rate was determined to be lower, but at higher feed rates, the reduction was determined to be greater. Compared to using an uncovered carbide insertion, the MRR was discovered to be greater when machining using a unique TiN covered carbides tools. Within the constraints of this investigation, it was determined that the innovative TiNcoated device outperformed the unprotected in terms of particle elimination rates, as well as the coating worked elements' characteristics were even superior. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
