| Autor: |
Volff Amavisca, Carla, Vieira Braga Lemos, Guilherme, Dornelles Ramos, Fabiano, Bergmann, Luciano, Reguly, Afonso, Klusemann, Benjamin |
| Předmět: |
|
| Zdroj: |
International Journal of Advanced Manufacturing Technology; Oct2024, Vol. 134 Issue 7/8, p3325-3336, 12p |
| Abstrakt: |
Orbital friction stir welding (FSW) is a promising approach to joining clad pipes. In this work, the influence of individual process parameters on the material flow even as, mechanical properties in orbital friction stir welded clad pipes is investigated. Due to the local heterogeneous microstructures within the weld, joints were evaluated by optical and scanning electron microscopy (SEM), microhardness, and digital image correlation (DIC). A microhardness increase was observed, with a maximum of 380 HV0.5 within the Inconel 625 and 265 HV0.5 within the X65 steel stir zones. Sound joints had an average ultimate tensile strength (UTS) exceeding up to 13% of the calculated theoretical tensile strength, which is obtained considering the minimum tensile strength of both materials. Additionally, failure occurred in the base material during the tensile testing, where the local strain in the stir zones of the X65 steel and Inconel 625 were only 3.3% and 10%, respectively. In summary, this investigation shows friction stir welded joints of API X65 steel and Inconel 625 clad pipes with high mechanical properties. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink