| Abstrakt: |
The objective of this work was to characterize the produced activated carbons based on Phoenix dactylifera rachis (date palm rachis: RP) using steam with different burn-off values (45, 55, and 65%), and then use those carbons to eliminate BEZAKTIV Red S-MAX (RS), a commercial textile dye. The characterization of the carbons was carried out by analyzing N2 adsorption–desorption, SEM, FTIR, TGA/SM, Boehm titration, and pHPZC. The specific surface area S2D-NLDFT was 500, 646, and 507 m2/g for the activated carbons PRAC45, PRAC55, and PRAC65, respectively. The Box–Behnken design (BBD) of experiments was applied to determine the influence of burn-off (A), initial concentration (B), and pH of the solution (C) for the RS dye elimination from the aqueous system. The significant interactions between the factors were AB and BC with p-value < 0.05. The RS dye adsorption experiments were examined by applying the kinetic and isotherm models and by studying temperature and pH effect. It was found that the RS adsorption followed the pseudo-second-order (R2 > 0.99) and the removal data were well fitted to the Langmuir isotherm model. The Langmuir maximum adsorption capacity Qm of RS dye was 198 mg/g for PRAC55. The regeneration of the carbons using thermal treatment was tested, and it revealed that the specific surface area S2D-NLDFT and the RS adsorption capacity Qm increased after the regeneration to 965 m2/g and 56.3 mg/g, respectively, for PRAC55. The Phoenix dactylifera rachis adsorbents could eliminate industrial wastewater (IW) which contains BEZAKTIV dyes with an adsorption rate superior to 55%. [ABSTRACT FROM AUTHOR] |
Full text from SpringerLink