| Autor: |
Adeyemi, Olusola Michael, Lathashankar, Boluvar, Rajan, John, Jose, Swaminathan, Oke, Sunday Ayoola |
| Předmět: |
|
| Zdroj: |
Kufa Journal of Engineering; Jul2024, Vol. 15 Issue 3, p186-212, 27p |
| Abstrakt: |
This paper proposes a hybrid T-DEA-P (Taguchi-Data Envelopment Analysis-Pareto) method to optimise and rank parameters of the electrohydraulic forming process using the aluminium (AA1100) sheets for automotive panel application. A linear programming model was formulated based on the integrated Taguchi – DEA data and solved using DEA software. The design variables are the stand-off distance, electrode gap voltage and medium. The constraints are formulated according to the levels specified in the level-factor table. Using literature data, the validation of the method was made. An important result shows that case 1 has the optimal parametric setting is SOD3E2V2M2. This is interpreted as a stand-off distance of 3mm, an electrode gap of 30mm a voltage of 260 volts and the medium as Oil with a viscosity of 0.89cP. The delta values are 16.026, 16.0605, 17.1109 and 37.3587. Delta values measure the rate of change of the average signal-to-noise ratios relative to the changes in levels. Based on the Pareto intervention, the medium is ranked first while voltage, electrode gap and stand-off distance are ranked second, third and fourth, respectively. The method aids in the planning activity for the forming process. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
