| Abstrakt: |
The rapid advancement of the electronics industry has continuously increased demands for the E‐glass yarn's quality and production capacity. The twisting and winding process stands out as a crucial step in E‐glass yarn production. Twisted bobbin yarns are produced separately using constant spindle speed technology and constant tension technology in order to address issues such as high yarn breakage rates and excessive yarn hairiness during twisting. By comparing the twisting tension, yarn breakage rates, and yarn hairiness between these two technologies, this study delves into the impact of twisting technology on E‐glass yarn quality and production capacity. The results indicate that, in comparison with constant spindle speed technology, constant tension technology reduces the unevenness ratio of twisting tension from 8.94% to 0.55%, decreases yarn breakage rates from 3.05% to 2.03%, reduces long hairiness by 20.3%, and reduces short hairiness by 25.1%. By reducing the spindle speed when the bobbin yarn's diameter increases, constant tension twisting technology reduces the unevenness ratio of twisting tension, yarn breakage rate, and yarn hairiness. These research findings lay the foundation for the development of high‐end E‐glass yarn products and carry significant practical value in improving yarn quality, enhancing production capacity, and reducing E‐glass yarn losses. Highlights: The twisting and winding principle of E‐glass yarn is revealed.The relationship among four tensions in the twisting and winding process is clarified.The parameters for the constant tension twisting technology are developed.The measurement method for the twisting tension is improved. [ABSTRACT FROM AUTHOR] |
Plný text