| Abstrakt: |
The paper has a dual purpose: firstly, to examine the influence of various cutting conditions (cutting speed Vc, feed f, depth of cut ap, tool nose radius rɛ, and cutting edge angle Xr) on the quality of machined parts (Ra), tangential force (FZ) and cutting power (Pc) during the turning process of polyoxymethylene POM-C. Two carbide inserts, SPMR 120304 and SPMR 120308, were used for the three-dimensional cutting operations. Secondly, the goal is to identify optimal cutting conditions that maximize material removal rate (MRR) while minimizing three output parameters (Ra, FZ, and Pc). The study employed analysis of variance (ANOVA) to assess the significance of the input parameters on the desired outcomes and utilized an artificial neural network (ANN) to create mathematical models. The K-fold Cross-Validation approach was deemed suitable due to its efficiency in requiring fewer experiments. To optimize the cutting conditions, a new metaheuristic optimization algorithm called Multi-Objective Artificial Hummingbird Algorithm (MOAHA) was selected. ANOVA analysis reveals that factors f and rɛ contribute 58.05% and 32.25%, respectively, to the response Ra. Classical parameters (Vc,f, and ap) also impact mechanical cutting actions (FZ and Pc). The MOAHA algorithm, coupled with four ANN models, optimized the five cutting conditions, resulting in optimal values Vc = 250 m/min, f = 0.08 mm/rev, ap = 1.3 mm, rɛ = 0.8 mm, and Xr = 75°. Under these conditions, responses are: Ra = 0.6 μm, FZ = 21.51 N,Pc = 60.24 W, and MRR = 26.38 cm3/min. The ANN-MOAHA coupling provides an excellent, simple, and fast computer tool for multi-objective optimization. [ABSTRACT FROM AUTHOR] |
