Autor: |
Bajmalu Rostami, Rahman, de Souza Ciacco, Pedro, Viali Muñoz, Mauricio Claudio, Simoes, Luis Fellipe, Garcia, Calixto Isaac |
Předmět: |
|
Zdroj: |
Metals (2075-4701); Jul2024, Vol. 14 Issue 7, p783, 17p |
Abstrakt: |
The dissolution behavior of δ-ferrite in two commercial stainless steels, 15-5PH and M-154, was studied. In this work, a new approach combining hot deformation and additional post-treatment was investigated and compared with conventional annealing heat treatments for the dissolution of δ-ferrite. The results showed the acceleration in the dissolution of δ-ferrite using the new methodology. Samples from each steel were subjected to conventional annealing heat treatments at 1000 °C and 1150 °C, with soaking times of 1, 2, and 3 h. A second set of samples was subjected to hot compression experiments at 900 °C, under different strain rates, followed by post-processing heat treatments at 1000 °C and 1150 °C, while keeping the holding time constant for 10 min. Advanced microstructural characterization techniques such as Scanning Electron Microscopy (SEM), and Electron Probe Micro-Analysis (EPMA) were employed to investigate δ-ferrite dissolution in terms of changes in area fraction and chemical composition. The results indicated a strong correlation between the dissolution behavior of δ-ferrite and the processing parameters. In addition, thermodynamic calculations using Thermo-Calc software (version 2021.2.87071-368) were used to assess the diffusion of elements during the dissolution of δ-ferrite as a function of temperature and time. [ABSTRACT FROM AUTHOR] |
Databáze: |
Complementary Index |
Externí odkaz: |
|