Autor: |
Ren, Manqian, Lin, Lin, Hao, Jiankui, Wang, Gai, Wang, Ziyu, Wang, Deyang, Shen, Haoyu, Quan, Shengwen, Wang, Fang, Feng, Liwen, Jiao, Fei, Zhu, Feng, Zhu, Kun, Yan, Xueqing, Huang, Senlin |
Předmět: |
|
Zdroj: |
Applied Sciences (2076-3417); Jul2024, Vol. 14 Issue 14, p6350, 17p |
Abstrakt: |
A liquid helium-free cryostat for radio frequency (RF) test of the superconducting cavity is designed and constructed. Gifford-Mcmahon (G-M) cryocoolers are used to provide cooling capacity, and the heat leakage at 4 K is less than 0.02 W. Vertical and horizontal tests of two Nb3Sn cavities are carried out in the cryostat with different surface treatments outside the cavities. Both of the cavities achieve stable continuous wave (CW) operation. A novel treatment, which cold-sprayed a 3.5 mm thick Cu layer onto the outside of the cavity, enables the maintenance of an average temperature of 5.5 K in the cavity at a RF loss of 10 W, implying that the thermal stability and uniformity of the cavity has been significantly improved. Through the synergistic control of four metal film resistors, a cooling rate of 0.06 K/min near 18 K is realized, and the cavity temperature gradient is reduced to 0.17 K/m, which effectively improves the RF performance of the cavity. The maximum E a c c of the cavity reaches 3.42 MV/m, and the Q 0 is 1.1 × 109. An electromagnetic–thermal coupling simulation model for the superconducting cavity is established and is in good agreement with the experimental results. The simulation results show that the cavity with a Cu-spraying treatment and the thermal links of 5N Al can satisfy the E a c c of 10 MV/m under conduction cooling. [ABSTRACT FROM AUTHOR] |
Databáze: |
Complementary Index |
Externí odkaz: |
|